WaterFeature8 Sensor Interface System
The Sensor Interface System is pretty simple ... it is a WaterFeature8 assembled in a self contained enclosure.
It includes the following:
.. AC-DC Wall Power Adapter
.. Enclosure Mounting Brackets
.. Spare entry bushing and gasket
.. CR2025 battery for RTC memory retention
.. Rocker Power Switch on the left
.. 8 BNC Terminals on the bottom
.. 4 Pushbuttons on the right
.. DB9 Female Connection for RS-232 Remote State serial communications
.. in a NEMA 4X polycarbonate enclosure with clear cover
All you need to add are EZO circuits and senors, in any combination of up to 8 different parameters:
-
Dissolved Oxygen
-
Oxidation Reduction Potential
-
pH
-
Temperature
-
Flow
-
Conductivity
-
CO2(g)
-
Pressure
-
O2(g)
-
Humidity
The WaterFeature8 reads the field sensor data and displays the scaled output on a local LCD screen. It also sends a standard 4-20 mA output to a nearby Programmable Logic Controller (PLC) analog input card. Remote State operating system can be accessed over RS-232 with a DB9 connector at the chassis.